How to tell if your lightbulb is faulty and how to fix it

Faulty lightbulbs

If the lighting in your home is acting up and you think your light bulbs may be responsible, you may want to check to see if your light bulbs are working properly in order to resolve this issue. There are several ways to inspect and determine whether your bulbs are faulty or damaged, affecting your interior lighting and flickering as a result.

Is your home suffering from light bulb failures frequently or have you only recently just discovered a flickering bulb in your space? Regardless of the severity of your suspected light bulb faults, be it a problem with your selection of post lights or an issue with your wall lights, we will outline all you need to know about detecting faulty light bulbs and how to fix them.

Damaged or burned-out bulb

 It’s possible that your light bulb is damaged or burned out if it’s secured tightly yet still flickers constantly. For a variety of reasons, incandescent bulbs might stop performing properly and begin to flicker. Flickering can be caused by contact issues, poor electrical connections, worn-out receptacles, or a damaged filament. These issues frequently arise when the light bulb ages. They can also occur as a consequence of normal wear and tear, incorrect voltage, or faulty wiring within the light fitting.

The light bulb is most likely burned out if the filament has burned out and no longer conducts electricity. For any other types of faultiness with your bulb, it has probably gone bad and is damaged.

Detecting a burned-out bulb

 If the light goes out suddenly shortly after turning it on via flicking the switch, this is an early indicator that your light bulb has burnt out. To fix this, start by removing the bulb from the light fixture and turning off the light switch. You may have to wait for the bulb to cool down; never try to remove a light bulb that’s been on for a long time. You need to examine the bulb and see if it has a coating of black powder. This powder should be white or clear so if it’s black, then the filament has burned out.

How to tell if your bulb is faulty

 Shaking your bulb is an easy way to check if it is faulty or not. If when shaking your bulb a rattling sound is produced, this means the filament is faulty or damaged and will burn out soon if it hasn’t already. Remove the bulb and place it in a suitable light fixture that you are certain will function. If the light now works, you know the issue is with the fixture or connection; however, if it doesn’t, discard the lightbulb and replace it.

Faulty light bulb socket

 Fixture socket issues can shorten the life of lightbulbs. The socket base of the light fixture may have a loose electrical connection. These issues frequently force the lightbulb to operate considerably hotter, causing the connecting joints to melt or the contacts to burn. Light bulb sockets are relatively straightforward to repair, although repairing permanent light fixtures may be more challenging.

Now that you understand the basics, you should be able to spot the issue and fix it with as little hassle as possible.


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.